Home / News

Planetary gear reducer

Knowing that you are interested in Planetary gear reducer, we have listed articles on similar topics on the website for your convenience. As a professional manufacturer, we hope that this news can help you. If you are interested in learning more about the product, please feel free to contact us.
  • 2013-12-31
    Reducer products have high efficiency, energy saving, low cost, high strength, low noise, stable operation, convenient installation and maintenance, and are widely used in petroleum, chemical, plastic, rubber, food, beverage, brewing, woodworking, packaging, textile, printing and dyeing, papermaking, Light industry, environmental protection, three-dimensional parking garages and assembly lines and other mechanical equipment fields.
  • 2013-11-25
    To know what a reducer is, you first need to understand the background of the reducer. The reducer we are talking about is a product since industrialization. With the unification of motor standards, the more commonly used motors on the market are now divided into 2 poles, 4 poles, 6 poles, and 8 poles. The number of revolutions of each pole number is specific, that is, it is prescribed. For example, the most commonly used 4-pole motor is 1450 revolutions per minute.
  • 2013-10-24
    Supervisor Huang Zhiming said this at the \"Autodesk Machinery and Equipment Industry Senior Seminar\" held in Shanghai on December 14, 2012. The high-level seminar held by Autodesk in the machinery and equipment industry is a specialized closed forum for the pain points of the informatization of the machinery and equipment industry. A number of informatization experts and Autodesk technical experts from well-known domestic machinery and equipment industries Conducted extensive and in-depth exchanges.
  • 2013-09-17
    A regular, once per tooth, it is often very strong. The resulting vibration not only causes a large load on the gear, but also causes noise. Another disadvantage is that sometimes the additional strength obtained by the engagement of two pairs of teeth during the contact time cannot be used because the stress is limited by the condition of the single tooth engagement during the cycle.
  • 2013-08-09
    Roller, inverted gear and friction drive that are making a comeback in speed regulation. Hydraulic or electric drive may be the most suitable for some specific occasions, they have the advantage of being able to store some energy for speed regulation. Gear transmission has the following characteristics: (1) It is extremely compact, so it is particularly useful when space is limited, while belt or hydraulic transmission is more advantageous for long-distance transmission.
  • 2013-08-08
    1. The reducer heats up and leaks oil. In order to improve efficiency, worm gear reducers generally use non-ferrous metals as worm wheels, and worms use harder steel. Because it is a sliding friction drive, more heat will be generated during operation, which will cause differences in thermal expansion between the various parts of the reducer and the seal, thereby forming a gap on each mating surface.
  • Total 4 pages  Go to Page
  • Go
Jiangsu Taixinglong Reducer Co., Ltd., 
Taixinglong reducer has a strong technical force, professional R&D and production of various types planetary reducer、gear reducer、hard tooth surface reducer, modular reducer.
TEL: +86-523-87996188/87996888
Phone:+8615605162023
FAX:+86-523-87996999/87996899
E-mail: txljsj@aliyun.com

Products

Contact Us
 Copyrights 2021 Jiangsu Taixinglong Reducer Co., Ltd.     Sitemap