Home / News / Technical Support

Technical Support

  • 2016-07-12
    Some users break the output shaft of the drive motor after running the equipment for several months. Why did the reducer twist the output shaft of the drive motor? For this reason, we checked the cross section of the output shaft of the drive motor and found that it was almost identical to the cross section of the output shaft of the reducer. The outer ring of the cross section is brighter, and the color of the section becomes darker towards the axis, and finally it is broken at the axis!
  • 2016-06-20
    First, let’s understand the scope of application of geared motors and see where they generally work. They are generally applicable to metallurgy, mining, light industry, chemical steel, cement, printing, sugar, food, gum, pickles, construction, Heavy transportation, fan and other industries, and can be used to import equipment.
  • 2016-06-02
    Reducer use skills: 1. After 200 to 300 hours of operation, the oil should be changed for the first time, and the quality of the oil should be checked regularly in future use. The oil mixed with impurities or deteriorated should be replaced in time. Under normal circumstances, for a long-term continuous working reducer, the reducer that has been out of service for a long time should be replaced with new oil after 5000 hours of operation or once a year.
  • 2016-05-13
    At present, the commonly used reducers in China can be roughly divided into five categories: gear reducers, planetary gear reducers, worm gear reducers, pendulum pin wheel reducers and various hybrid transmission boxes, in addition to other types of reducers Machine, but the application is not very common yet.
  • 2015-07-31
    After the reducer leaves the factory, it is generally stipulated that there is a running-in period of about 200 hours (the oil must be changed after the time is exceeded), which is stipulated by the technical characteristics of the initial stage of the use of the reducer. The running-in period is an important link to ensure the normal operation of the reducer, reduce the failure rate, and extend its service life.
  • 2015-07-06
    Since the market share of high-end reducer products in my country has accounted for 1/4-1/3 of the total market in the past two years, and from the perspective of development trends, the market share of high-end reducer products in my country will continue to be about 5% per year. The speed increases. At the same time, it is predicted that the domestic annual demand for hard-tooth surface reducers will reach more than 200,000 units this year.
  • Total 7 pages  Go to Page
  • Go
Jiangsu Taixinglong Reducer Co., Ltd., 
Taixinglong reducer has a strong technical force, professional R&D and production of various types planetary reducer、gear reducer、hard tooth surface reducer, modular reducer.
TEL: +86-523-87996188/87996888
Phone:+8615605162023
FAX:+86-523-87996999/87996899
E-mail: txljsj@aliyun.com

Products

Contact Us
 Copyrights 2021 Jiangsu Taixinglong Reducer Co., Ltd.     Sitemap