Views: 3 Author: Site Editor Publish Time: 2017-02-21 Origin: Site
The reducer has some smallskillCan make your reducer better:
1. After 200~300 hours of operation, the oil should be changed for the first time, and the quality of the oil should be checked regularly in the future use, and the oil mixed with impurities or deteriorated should be replaced in time. Under normal circumstances, for a long-term continuous working reducer, the new oil should be replaced by 5000 hours of operation or once a year, and the long-term deactivated reducer should also be replaced with new oil before restarting. The reducer should be filled with oil of the same grade as the original, and should not be mixed with oils of different grades. Oils with the same grade but different viscosity are allowed to be mixed;
2,Oil changeIt is necessary to wait for the reducer to cool down until there is no danger of burning, but it should still be kept warm, because after complete cooling, the viscosity of the oil increases and it is difficult to drain the oil. Note: Cut off the power supply of the transmission device to prevent accidental power on;
3. During work, when the oil temperature rises above 80°C or the oil pool temperature exceeds 100°C and abnormal noise is found, stop using it, check the cause, remove the fault, and replace the lubricating oil before continuing to run ；
4. The user should have reasonable use and maintenance rules and regulations.Operating situationThe problems found in the inspection and inspection should be carefully recorded, and the above regulations should be strictly implemented.