Home / News

Gear reducer

These articles are all highly relevant Gear reducer. I believe this information can help you understand Gear reducer's professional information. If you want to know more, you can contact us at any time, we can provide you with more professional guidance.
  • 2014-07-26
    Due to the harsh operating environment of the reducer, failures such as wear and leakage often occur. The most important ones are: 1. The wear of the bearing chamber of the reducer includes the wear of the housing bearing box, the inner bore bearing chamber of the box, and the gearbox bearing chamber 2. The shaft diameter of the gear shaft of the reducer is worn, and the main wear parts are the shaft head and keyway.
  • 2014-07-07
    1. Precautions before installation: 1. The installation shaft should be cleaned before use. And check whether the installation shaft has bruises and dirt, if any, all should be removed. 2. The operating temperature of the reducer is 0-40 ℃. 3. Check whether the matching size of the hole (or shaft) connected with the reducer meets the requirements. The tolerance of the hole should be H7 (the tolerance of the shaft is H6).
  • 2014-06-04
    According to the staff's summary, there are eight common faults in the operation of gear reducers. What are the eight common faults, what are the causes of the faults, and how to deal with them? The following are analyzed one by one. One: The sound of the gear reducer is abnormal or there is noise. Reasons: There are more impurities in the lubricating oil; the gear meshing part is damaged, the gear gap is increased, and the bearing gap is large; the bearing is damaged or worn seriously.
  • 2014-05-16
    The reducer plays an important role in the operation of the equipment, but the parts that make up the reducer are also very important. If the performance of the parts does not meet the requirements, the effect of the reducer cannot be exerted. The bracket is one of the important parts of the reducer, how to choose it.
  • 2014-04-22
    After the reducer leaves the factory, it is generally stipulated that there is a running-in period of about 200 hours (the oil must be changed after the time is exceeded), which is stipulated by the technical characteristics of the initial stage of the use of the reducer. The running-in period is an important link to ensure the normal operation of the reducer, reduce the failure rate, and extend its service life. The technical staff of the reducer factory gave the following precautions.
  • 2014-04-04
    1. Installation 1. Cylindrical gear motors generally need to be installed on a horizontal surface with an inclination not exceeding 10°. If the inclination is greater than 10° due to special needs, please contact our company before use. 2. When the input shaft and output shaft are connected to the power and supporting machinery, if the coupling is used, the shaft and the shaft are required to be strictly aligned, and there should be no misalignment. The use of V-belts and chains should not be too tight or too loose.
  • Total 4 pages  Go to Page
  • Go
Jiangsu Taixinglong Reducer Co., Ltd., 
Taixinglong reducer has a strong technical force, professional R&D and production of various types planetary reducer、gear reducer、hard tooth surface reducer, modular reducer.
TEL: +86-523-87996188/87996888
Phone:+8615605162023
FAX:+86-523-87996999/87996899
E-mail: txljsj@aliyun.com

Products

Contact Us
 Copyrights 2021 Jiangsu Taixinglong Reducer Co., Ltd.     Sitemap