Precautions during the running-in period of the reducer

ReducerAfter leaving the factory, it is generally stipulated that there is a running-in period of about 200 hours (the oil must be changed after the time is exceeded), which is stipulated by the technical characteristics of the decelerating machine at the initial stage of use. The running-in period is an important link to ensure the normal operation of the reducer, reduce the failure rate, and extend its service life. The technical staff of the reducer factory gave the following precautions:
1. Reasonably select lubricating oil, especially geared motors with input power greater than 11KW must be filled with load gear oil. Pay attention to frequently check the lubricating oil, hydraulic oil, coolant, oil level and quality, and pay attention to check the tightness of the whole machine. Excessive oil shortage is found during the inspection, and the reason should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point every week during the running-in period (except for special requirements). When connecting a vertical reducer with an oil pump, pay attention to the direction of rotation of the oil pump. Clockwise rotation is correct.
2. KeepingGeared motorClean, adjust and tighten loose parts in time to prevent them from being worn out or lost due to loosening.
3. At the end of the running-in period, the machine should be maintained compulsorily, inspection and adjustment should be done, and attention should be paid to the replacement of oil.
In short, the requirements for use and maintenance of the reducer during the running-in period can be summarized as: strengthening training, reducing load, paying attention to inspection, and strengthening lubrication. As long as you pay attention to and implement the maintenance and maintenance of the reducer during the running-in period as required, it will reduce the occurrence of early failures, extend the service life, improve production efficiency, and make the reducer bring you more benefits.