How to lubricate the planetary reducer? The planetary reducer needs to be lubricated when it runs like other reducers, so that not only can accelerate the operation of the planetary reducer, but also protect the normal operation of the reducer. How to lubricate the planetary reducer?

What are the types and functions of common reducers? According to the needs of the reducer, choose different types of reducer. According to the different characteristics of the reducer, different types of reducers can be distributed and divided. Common reducers include worm gear reducers; planetary reducers; harmonic reducers.

Step 1: Select the installation method and type of the reducer. Step 2: Preliminarily determine the production process and parameters of the product, select the performance level, and select the material, processing technology, processing and lubrication methods used in the reducer. The third step: Determine the transmission ratio. Determine the transmission ratio according to the needs of mechanical transmission.

We have a word in the heat description of the gear reducer called temperature rise, what does temperature rise mean? Why not use the common form of how much temperature to express? ght by: wy temperature rise is the temperature difference between the gear reducer and the environment, which is caused by the heat of the gear reducer.

Due to the harsh operating environment of the reducer, failures such as wear and leakage often occur. The most important ones are: 1. The wear of the bearing chamber of the reducer includes the wear of the housing bearing box, the inner bore bearing chamber of the box, and the gearbox bearing chamber 2． The shaft diameter of the gear shaft of the reducer is worn, and the main wear parts are the shaft head and keyway.

1. Precautions before installation: 1. The installation shaft should be cleaned before use. And check whether the installation shaft has bruises and dirt, if any, all should be removed. 2. The operating temperature of the reducer is 0-40 ℃. 3. Check whether the matching size of the hole (or shaft) connected with the reducer meets the requirements. The tolerance of the hole should be H7 (the tolerance of the shaft is H6).